Happymodel Bassline 2S 90mm 2 Inch Micro Toothpick FPV Racing Drone BNF with CADDX ANT 1200TVL Camera
Introduction: Introduce the Bassline , inspired from Our team pilot Nathan Loopz . This ide Awas originally born in 2019, and today make it into ABNF. Even though we have many excellent Micro Freestyle drones now days, but the Bassline’s performance is still the craziest. Manual: ELRS Version ; Frsky Version ; PNP Version Features: X12 5-IN-1 AIO flight controller built-in 2.4G ELRS V2.0 and OPENVTX
VTX Power up to 400mw Support ELRS V3.0 (Need to upgrade firmware) Powerful EX1103 KV11000 motors
CaddxFPV Ant FPV camera Recommend battery (Not include): 2S 350mah/450mah/550mah/650mah , Battery tray size: Maximum support for batteries with a width of approximately 17mm and a height of approximately 13mm
Specifications:
Brand Name: Happymodel
Item Name: Bassline 2S 2inch Micro FPV toothpick droneWheelbase: 90mmSize: 115mm*115mm*40mm Analog version Weight: 40gram
Power supply: 1-2S LiPo/LiPo HV Current: 12A continuous peak 15A (3 seconds) Support BLHeliSuite programmable Default Factory firmware: Z_H_30_REV16_7.HEX Default protocol: DSHOT300 Support Bluejay firmware
Onboard SPI ExpressLRS 2.4GHz Receiver
Packet Rate option: 50Hz/150Hz/250Hz/500Hz ExpressLRS Firmware version: V2.0 RF Frequency: 2.4GHz Antenna : SMD antenna Telemetry output Power: <12dBm Receiver protocol: SPI ExpressLRS Compatible with ExpressLRS V2.0 TX Module Couldn??t flash separately ExpressLRS firmware Could flash FC firmware to support ExpressLRS v3.0 TX module
Onboard SPI Frsky D8/D16 receiver Version
SPI BUS receiver Frsky D8/D16 compatible Compatible Non EU transmitter D8/D16 model Channels: 8ch/16ch No ground interference ( Transmitter and receiver 1 m from the ground): 200meter Failsafe support
Onboard SPI Flysky receiver Version
SPI BUS receiver Protocol: AFHDS-2A Channels: 14ch(AFHDS-2A) No ground interference ( Transmitter and receiver 1 m from the ground): 200meter Failsafe support
PNP Version (without onboard receiver)
Full UART1 for external Receiver Support CRSF/GHOST/SBUS/IBUS/DSMX protocol IR1 pad(invert RX1) used for SBUS input
Onboard 5.8g OPENVTX
Firmware version: OPENVTX Smartaudio v2.1 PIT Mode support RCE Mode support Channels:48ch Transmitting Power: 0/RCE/25mw/100mw/400mw Power supply: DC 5V Current (5v): <650ma (400mw)
Caddx ANT 1200tvl camera
Image Sensor: 1/3′ CMOS Sensor Horizontal Resolution: 1200 TVL TV System: NTSC or PAL IMAGE: 16:9 or 4:3 Synchronization: Internal Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000 S/N Ratio : >52dB (AGC OFF) Video Output: CVBS Lens: 1.8mm Min. Illumination: 0.001Lux@F1.2 Auto Gain Control: YES WDR: Global WDR DNR: 3D DNR Dimensions: 14*14mm(with bracket to 19*19mm) Wide Power Input: DC 3.7-1