Happymodel Mobula6 ELRS 1S 65mm FPV Racing Drone with 0702 26000KV Motor, RunCam Nano 3, 5.8G VTX, Brushless Whoop, BNF

Description

Happymodel Mobula6 ELRS 1S 65mm F4 AIO 5A ESC ELRS Receiver And 5.8G VTX Brushless Whoop FPV Racing Drone BNF w/ 0702 26000KV Motor RunCam Nano 3 Camera

The Happymodel Mobula6 ELRS 1S 65mm FPV Racing Drone offers an exceptional racing experience with its advanced features. Equipped with the ExpressLRS RC link system, this drone ensures low latency and high packet rates for reliable performance. The Mobula6 features the ultra-light SE0702 26000KV brushless motors, making it ideal for agile and fast maneuvers. The built-in RunCam Nano 3 camera delivers high-quality 800TVL resolution for clear and detailed video feeds. With a robust AIO flight controller and a 5.8G VTX, this brushless whoop drone is designed for seamless FPV racing. Compatible with 1S Lipo/LIHV batteries, it offers powerful performance in a compact 65mm wheelbase.

Noticeã„© ELRS 2.4G Receiver Version’s color change into Blue Color. ( still several in Green, will send randomly)
July 29th, 2023. BeiJing Time
Notice: Because the MPU6000 is out of production, the flight controller and related Drone will gradually be replaced by ICM20689 or BMI270.
Introduction:
ExpressLRS is currently the most popular remote control link system. It has the characteristics of low latency and high packet rate, and its link quality is very reliable. Now we are about to release Mobula6 equipped with ExpressLRS RC link system, the new Mobula6 elrs would coming out with a new 0702 brushless motor, that would be the lightest brushless motors all over the world. We＊re sure this would be a good option for you in the Tiny Whoop Season.
Features:
AIO Flight controller with ELRS Receiver and 5.8G VTX
Super light 1S 65mm Brushless whoop only 18.7g
Equipment with the lightest brushless motors-SE0702 only 1.46gram
Runcam Nano3 The lightest 1/3 CMOS 800TVL Camera
Smooth and powerful
Compatible for 1S Lipo/LIHV
Description:
Brand: Happymodel
Item Name: Mobula6 ELRS 1S 65mm Brushless whoop drone BNF version
Wheelbase: 65mm
Size: 80mm*80mm*37mm
Weight: 18.7g
Voltage:1S

Version

2.4GHz ELRS

915MHz ELRS

868MHz ELRS

Color

Green ( Change into Blue from July 29, 2023)

Blue

Blue

Flight controller

ELRS F4 2G4

CrazyF4 ELRS

CrazyF4 ELRS

Firmware target

CRAZYBEEF4SX1280

CRAZYBEEF4DX

CRAZYBEEF4DX

Built-in ExpressLRS receiver

SPI 2.4GHz

Serial-base 915MHz

Serial-base 868MHz

Built-in Dshot ESC

5A

5A

5A

Receiver antenna plug

SMD ceramic antenna

IPEX MHF3

IPEX MHF3

Onboard VTX power

25mw~200mw

25mw~200mw

25mw~200mw

Brushless Motor

0702 KV26000

0702 KV26000

0702 KV26000

Propeller

HQPROP 31mm Bi-blade

HQPROP 31mm Bi-blade

HQPROP 31mm Bi-blade

Battery

1s 300mah Lipo battery

1s 300mah Lipo battery

1s 300mah Lipo battery

Specification:

Motor

Mode: SE0702 KV26000
Configu-ration:9N12P
Stator Diamter:7mm
Stator Length:2mm
Shaft Diameter:朴1mm
Motor Dimension(Dia.*Len):朴9.5mm*14mm
Weight(g):1.46g
No.of Cells(Lipo):1S only

Propellers

HQprop31mmx2
Center Thickness:5mm
Prop Disk Diameter:31mm
Center Hole Inner diameter:1.0mm
Weight:0.2g

Flight controller

ELRS F4 2G4 flight controller built-in SPI expresslrs 2.4G receiver
CrazyF4 ELRS flight controller built-in 915MHz expresslrs receiver
CrazyF4 ELRS flight controller built-in 868MHz expresslrs receiver
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000 or ICM20689 or BMI270.(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 1S battery input (DC 2.9V-4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G VTX
Built-in ExpressLRS 2.4G/915MHz/868MHz receiver
Built-in 5V 1A BEC
Built-in voltage detection

Onboard 4in1 ESC

MCU upgraded to EFM8BB21
Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: O_H_5_REV16_7.HEX
Default protocol: DSHOT600

Onboard SPI ExpressLRS 2.4GHz Receiver (Optional)

Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
RF Frequency: 2.4GHzAntenna : SMD antenna
Telemetry output Power: <12dBmReceiver protocol: SPI ExpressLRS
Could bind with Happymodel ES24TX , ES24TX Lite, ES24TX Slim and DIY 2.4GHz ELRS TX module ExpressLRS version 1.0.0 or 1.0.1 both compatible

Onboard Serial-based ELRS Receiver ( Optional)

Operation current: ~100Ma
Rx To FC protocol: CSRF
RF Frequency optional: 915mhz or 868mhz(EU)
Antenna connector: IPEX4
Telemetry output Power: <17dBmFirmware target: Happymodel_RX_ES915RXReceiver protocol: CRSF
Could bind with Happymodel ES915TX , Frsky R9M and DIY ELRS TX module(need to flash the same version ELRS firmware)
Firmware flash via Betaflight pass-through

Onboard 5.8g VTX

Output power: 25mw~200mw
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Frequency: 5.8GHz 5bands 40 channels
With RacebandSmartaudio ready

Runcam Nano3

Model: RunCam Nano 3
Image Sensor: 1/3∪ CMOS
Horizontal Resolution: 800TVL
Lens : 2.1mm(M8) FOV 160～
Signal System: PAL/NTSC Non Switchable
S/N Ratio: >50dB
Electronic Shutter Speed: Auto
Auto Gain Control (AGC): Auto
Min. Illumination: 0.01Lux@1.2F
D-WDR: Auto
Day/Night: Color
Power:DC 3-5.5V
Current: 110mA@5V 120mA@3.3V
Housing Material: ABS
Net Weight: 1.2g
Dimensions: L14mm*W14mm*H9mm

Lipo Battery

Capacity:300mAh
Voltage:3.8v
Continuous Discharge Rate: 30C
Size: 57mmx12mmx7mm
Weight: 8gConnector: PH2.0

Package Included:
1 x Mobula6 1S 65mm whoop Drone Frame
4 x SE0702 KV26000 brushless motor
1 x HQPROP 31mm bi-blade propellers (4cw+4ccw)
1 x Runcam Nano3 1/3 CMOS 800TVL camera
1 x Onboard 5.8G 25mw~200mw VTX
4 x 1S 300mah 30C LiHV Battery
1 x 1S Lipo/LIHV USB Charger
1 x Propeller disassemble tool
1 x ELRS F4 2G4 flight controller built-in receiver (Optional)