HGLRC Draknight 2″ 2S Toothpick FPV Racing Drone RTF Kit with Remote & Goggles for Beginners

Description

HGLRC Draknight 2 Inch 2S Toothpick RC FPV Racing Drone Entry-level RTF with Remote Controller FPV Goggles for Beginners

The HGLRC Draknight 2 Inch 2S Toothpick RC FPV Racing Drone is an ideal entry-level choice for beginners. It features a lightweight and compact design, making it easy to handle and maneuver. Equipped with a powerful motor, it ensures superior performance and fast speeds. The integrated flight controller provides precise and stable flight control, while the FPV camera allows for real-time video transmission, offering an immersive flying experience. With a long flight time, this drone promises extended play and enjoyment. The package includes a remote controller and FPV goggles, making it a complete ready-to-fly kit.

Features:
1. Lightweight and compact design for easy handling and maneuverability.
2. Powerful motor for superior performance and fast speed.
3. Integrated flight controller for precise and stable flight control.
4. FPV camera for real-time video transmission and immersive flying experience.
5. Long flight time for extended play and enjoyment.
Specifications:
Brand: HGLRC
Model: Draknight
Version: RTF

Draknight Drone

Frame: Draknight frame
Flight controller: SPECTER12 ES2-4S AIO
MCU: STM32F411
GYRO: ICM42688P
Built-in receiver: UART ExpressLRS 2.4G
Built-in VTX: 0-25-100-400mW(adjustable)
Continuous current:12A
Peak current: 15A(55)
ESC protocol:Dshot150/300/600
ESC firmware:/(Bluejay)
Flight control firmware: HGLRCF411SX1280_15A
Flight controlinput voltage: 25-45 (Lipo)
Mounting hole:25.5X25.5mm.M2
Motor:SPECTER 1003 10000kv motor
Propeller:Gemfan2023 propeller
ELRS version weight: 44.3g

C1 Remote Controller

Built-in ELRS: ELRS 2.4GHZ
Built-in ELRS refresh rate: 250Hz
Remote control sensor type: potentiometer sensor
Antenna: built-in ipex1 generation copper tube antenna
Working voltage: 6-8.4v DC
Remote control distance: greater than 500m
Output interface:
TX module NANO bin (crsf protocol)
TYPE-C(only charging and firmware flashing)
3.5MM analog trainer port
Battery: 18650 flat head battery â„…2 (need to be installed by yourself)
Charging: TYPE-C charging current 1.2A The charging time is about 3-4 hours
Remote control channel: 8 channels
Bluetooth: Bluetooth 4.2
ELRS firmware upgrade method:WIFI or TYPEC wire brush
ELRS firmware version: ELRS 3.0
ELRS firmware name: DIY devices 2.4 GHz DIY ESP32+E28 2.4GHz TX

FPV Goggles

VR100 5.8GHz Analog FPV Goggles

Wireless Dongle Module

Built-in ELRS Maximum supported
frequency: 250hz
Receiving distance: more than 200m
Binding method:Quickly power on and off three times to enter binding mode
Interface: USB TYPE-C+USB TYPE-A double plug
Working voltage: 5V
ELRS firmware upgrade method:WIFI or USB plug
ELRS firmware version: ELRS 3.0
ELRS Firmware Name: HGLRC 2.4 GHz HGLRC Hermes2.4GHz RX
External receiver support protocol: only supports CRSF protocol
Weight: 9.5g
Size: 74mmâ„…21mmx12.5mm

Package Included:
1x Packing Bag
1x Draknight drone
1x VR100 5.8GHZ FPV Goggles
1x C1 Remote Controller
1x C3 Charger
1x C3 Charger Power Cord
1x Wireless Dongle Module
1x 915 fpc antenna
1x Propeller extractor
8x Propeller
1x M2 hexagonal L wrench
1x 82mm Phillips 1.5 screwdriver
1x Micro data cable
1x typec charging cable
1x Goggles 3.5mm conversion cable
2x 2S 720mAh battery
1x C3 charger manual
1x Sticker
1x Draknight RTF Instructions
1x Card