Matek Systems F722-WPX Flight Controller STM32F722RET6 with Built-in OSD for RC Airplane Fixed Wing
Original price was: $145.98.$119.70Current price is: $119.70.
- 216MHz STM32F722RET6 MCU for high performance
- Built-in Pixel OSD and FrskyOSD for enhanced display
- Supports 2-6S LiPo batteries with high-precision current sensing
- Compact design with extensive connectivity options
- Includes dual camera inputs and microSD blackbox
You May Also Like
Description
Matek Systems F722-WPX STM32F722RET6 Flight Controller Built-in OSD 2-6S FC for RC Airplane Fixed Wing
The Matek Systems F722-WPX Flight Controller is designed for RC airplane fixed wings, featuring a powerful 216MHz STM32F722RET6 MCU. It includes MPU6000 IMU, DPS310 barometer, and Pixel OSD/FrskyOSD for optimal performance. With six UARTs, microSD blackbox, and dual camera inputs, this controller offers extensive connectivity. It supports 2-6S LiPo batteries with a high-precision current sensor and provides BEC options for peripherals and servos. The compact design includes a 44 x 29 x 10 mm size and a 25 x 25 mm mounting pattern. Note: INAV firmware updates may be required for full functionality.
Matek Systems F722-WPX STM32F722RET6 Flight Controller Built-in OSD 2-6S FC for RC Airplane Fixed Wing
Description:
Brand: Matek
Model: F722-WPX
MCU: 216MHz STM32F722RET6
IMU: MPU6000 (SPI)
Baro: DPS310 (I2C)
OSD: Pixel OSD/FrskyOSD (Uart6)
Blackbox: MicroSD socket (SPI)
6x UARTs(5 Spare) with built-in inversion
1x Softserial_Tx option
10x PWM outputs
1x I2C
4x ADC (VBAT, Current, RSSI, AirSpeed)
1x SH1.0_6pin connector (4V5/G/TX4/RX4/SDA/SCL) for GPS/compass
1x SH1.0_6pin connector for external USB and buzzer
Dual Camera Inputs switcher
Vbat filtered power ON/OFF switcher
PWM camera menu control: Not supported by INAV
DJI FPV air unit: any spare UART
Power
* 6~30V DC IN (2~6S LiPo)
* 132A high-precision Current Sense (Scale 250)
* PDB/Current sense resistor: 60A continuous, 132A burst.
* BEC 5V 2A for FC & Peripherals
* BEC Vx 5A for servos, 5V/ 6V option
* Vbat filtered output 1A for VTx and Camera
* LDO 3.3V 200mA
* Battery Voltage Sensor: 1:10 (Scale 1100)
FC Firmware
INAV target: MATEKF722WPX
Physical
Dimensions: 44 x 29 x 10 mm
Mounting: 25 x 25mm, 朴2mm
Weight: 20g w/ bottom plate and USB/buzzer adapter
* INAV2.5.x downloaded from configurator doesn＊t support Barometer DPS310 and SD card. download customized firmware from here.
* inav_2.5.1_MATEKF722PX_DPS310_SD.hex
* DPS310 & SD in target will be supported officially by INAV2.6 and new configurator.
* If Baro can＊t be detected. In INAV CLI mode, type command ※set baro_hardware = DPS310§
* Since INAV2.6, pls use target MATEKF722WPX
* Update FrskyOSD to 2.0 https://github.com/FrSkyRC/PixelOSD/tree/master/firmware
* INAV configurator nightly version 2.6
Package Included:
1x FC F722-WPX
1x USB(Type-C)/Buzzer (Active) Adapter
1x Bottom plate, 44 x 29mm
2x JST-SH-6P to JST-SH-6P cables, 20cm
5x Brass standoffs, M2 4mm
10x screws, M2 3.5mm
Dupont 2.54 pins (Board is shipped unsoldered)
Toys & Games > Hobbies > Remote & App Controlled Vehicle Parts > RC Airplane Parts
