Description
LHCXRC CLOUD 160 160mm Wheelbase 4mm Arm Thickness 3.5 Inch DIY Frame Kit Support DJI O3 Air Unit for RC Drone FPV Racing
The LHCXRC CLOUD 160 DIY Frame Kit is designed for RC drone FPV racing enthusiasts. Featuring a 160mm wheelbase and 4mm thick arms, this frame supports a 3.5-inch propeller blade size. It includes CNC aluminum alloy heat sinks and side plates, specifically designed for the DJI O3 Air Unit, ensuring optimal performance with high-definition digital image transmission. The frame is lightweight, with a total weight of 81g including 3D printed parts, and offers versatile motor mounting options. Compatible with GoPro Hero 8 Naked Camera and INSTA 360 GO 2 cameras, this frame kit provides a seamless and adaptable setup for advanced drone racing.
Specification:
Model: CLOUD 160
Wheelbase: 160mm
Top plate thickness: 2mm
Base plate thickness: 2mm
Arm thickness: 4mm
Flight controller installation hole position: 20mm X 20mm /25.5mm x 25.5mm
Flight control installation height: 25mm
Video transmission installation hole position: 20mm X 20mm / 25.5mm x25.5mm
Motor mounting hole distance: 16mm X 16mm / 19mm X19mm
Camera installation size: 20mm X 20mm
Suitable blade size: 3.5 inch propeller blade
Size: 195mm X 158mm X 37mm
Weight: 81g (including 3D printing parts)
Features:
– Small size, light weight, good flying feel
– 9mm x9mm and 12mm x 12mm motor holes can be installed
– with camera mounting base, perfect for installing GoPro Hero 8 Naked Camera and INSTA 360 GO 2 cameras
– Specially designed with CNC aluminum alloy heat sink for DJI O3 Air Unit
– The 7075 aluminum alloy CNC side plate can be perfectly adapted to the new high-definition digital image transmission lens of DJI O3 air unit
Recommended configuration (not included)
Brushless Motor: 1804 / 2004
Flight Controller: F411 AIO /F722 AIO
Lipo Battery: 4S 1300mAh
Propeller: 3520
The following Parts are Compatible: ( NOT Included)
FC AIO ESC: 25.5×25.5mm GHF411AIO BMI F4 OSD FCwith 5V 10V BEC AIO 40A BL_S 4In1 ESC
Brushless Motor: Geprc SPEEDX2 1804 3450KV 2-4S Brushless Motor
Propeller: Gemfan Hurricane 3520 3-Blade 3.5 Inch Propeller
Lipo Battery: ZOP Power 14.8V 1300mAh 100C 4S Lipo Battery XT60 Plug
Package List:
1 x upper plate 2.0mm
1 x Front Bottom 2.0mm
1 x Rear base plate 2.0mm
2 x Front Arm 4.0mm
2 x rear arm 4.0mm
4 x Textured aluminum column M2.5×25
12 x round head M2.5×5 screws
4x round head M2.5×8 screws
4x round head M2.5×12 screws
4 x Round Head M2x9 Screws
4 x round head M2x18 screws
4 x M1.6×8 screws (for dji O3 air unit mounting screws)
8 x rivet nuts M2 (already pressed)
2 x CNC Front Aluminum Parts
1 x CNC image transmission heat sink aluminum part
1 x camera vibration reduction 3D print left
1 x camera vibration reduction 3D print right
1 x Video Transmission Antenna Installation 3D Printing
1 x GPS mount 3D print
1 x Receiver T-antenna mount 3D print
1 x 3D print camera mounting base
1 x battery rolling strip
1 x Anti-slip mat for battery
4x Arm EVA Foot Pads
1 x Installation Instructions
Package Included:
1 x upper plate 2.0mm
1 x Front Bottom 2.0mm
1 x Rear base plate 2.0mm
2 x Front Arm 4.0mm
2 x rear arm 4.0mm
4 x Textured aluminum column M2.5×25
12 x round head M2.5×5 screws
4x round head M2.5×8 screws
4x round head M2.5×12 screws
4 x Round Head M2x9 Screws
4 x round head M2x18 screws
4 x M1.6×8 screws (for DJI O3 air unit mounting screws)
8 x rivet nuts M2 (already pressed)
2 x CNC Front Aluminum Parts
1 x CNC image transmission heat sink aluminum part
1 x camera vibration reduction 3D print left
1 x camera vibration reduction 3D print right
1 x Video Transmission Antenna Installation 3D Printing
1 x GPS mount 3D print
1 x Receiver T-antenna mount 3D print
1 x 3D print camera mounting base
1 x battery rolling strip
1 x Anti-slip mat for battery
4x Arm EVA Foot Pads
1 x Installation Instructions
Toys & Games > Hobbies > Remote & App Controlled Vehicles & Parts > Remote & App Controlled Vehicle Parts > Multi Rotor Parts
Reviews
There are no reviews yet.