Description
Only 20g Happymodel Mobula6 65mm Crazybee F4 Lite 1S Whoop FPV Racing Drone BNF w/ Runcam Nano 3 Camera
The Happymodel Mobula6 65mm Crazybee F4 Lite 1S FPV Racing Drone is designed for high-speed racing enthusiasts. Weighing only 20g, this compact drone features a Crazybee F4 Lite flight controller with a built-in ESC, receiver, and VTX. It is available in Frsky and Flysky receiver versions, compatible with various transmitters. The Runcam Nano 3 camera offers a 140-degree FOV for clear, wide-angle FPV footage. The drone is powered by a 1S battery and includes four 1S 300mAh 30C Lipo batteries. This drone is perfect for those looking to enhance their FPV racing experience with a lightweight and efficient design.
Notice:
1.Because the MPU6000 is out of production, the flight controller and related Drone will gradually be replaced by ICM20689 or BMI270.
2. The Camera of Mobula6 FOV is changed to 140 degree due to the earliest lens was stopped to production .
Please view the new spec from Runcam website https://shop.runcam.com/runcam-nano-3/
3. The flight controller of DSM2/DSMX version Mobula6 has been updated to be CrazybeeX DXS V1.0 after Dec.9th 2020 , it has built-in DSM2/DSMX spi receiver , so it wonㄙt come with an external Nano_sp09 receiver.
4. The battery brand that comes with the product is Tattu or Happymodel, which is shipped randomly.( Pls look at the photos showed)
Click here to buy replace parts together.
Specification:
Brand Name: HappymodelModel: Mobula6Item Name: 65mm Crazybee F4 Lite 1S Brushless Whoop FPV Racing Drone BNFOptional Version: Frsky Receiver ( Compatible with ACCST D8/D16, Recommend D8 mode)
Flysky Receiver ( Compatible with AFHDS and AFHDS-2A Flysky transmitter)Drone Wheelbase: 65mmSize: 80x80x37mm
Weight: 20g
|
Crazybee F4 LiteFlight Controller
Built-in ESC & Receiver & VTX
Frsky SPI RX version) CRAZYBEE F4 Lite Frsky version Firmware target: CrazybeeF4FR
(Flysky SPI RX version) CRAZYBEE F4 Lite Flysky version Firmware target: CrazybeeF4FS
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000 or ICM20689 or BMI270 (SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 1S battery input (DC 2.9V-4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G VTX
Built-in SPI Frsky/Flysky receiver
Built-in 5V 1A BEC
Built-in voltage detection
|
Onboard Frsky Receiver Version
SPI BUS receiver Frsky D8 compatible
Compatible Non EU transmitter D8 model- Frsky_x_lbt Support EU LBT Radio Transmitter
Channels: 8ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m
|
Onboard Flysky Receiver Version
SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
No ground interference ( Transmitter and receiver 1 m from the ground): 100~200m
Failsafe support
|
Onboard 5A BLheli_S 4in1 ESC
MCU upgraded to EFM8BB21
Power supply: 1S LiPo/LiPo HV
Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Default protocol: DSHOT600
|
SE0802 19000KV / 25000KV Motor
Model: SE0802
KV: 19000KV / 25000KV Motor
Configu-ration:9N12P
Stator Diamter:8mm
Stator Length:2mm
Shaft Diameter:?1mm
Motor Dimension(Dia.*Len):?10.5mm*14.9mm
Weight(g):1.9g
No.of Cells(Lipo):1S only
|
Gemfan 1219 3-Blade Propeller
Brand Name: Gemfan
Center Thickness:5mm
Prop Disk Diameter:31mm
Center Hole Inner diameter:1.0mm
Quantity: 4 CW & 4 CCW
Weight:0.28g
|
Onboard 5.8G 40CH 25mW VTX
Output power: 25mwFrequency: 40CHInput voltage: 3.3V 5.5VCurrent consumption: 300mA(type)Frequency: 5.8GHz 5bands 40 channelsWith Rac band Smartaudio ready
|
Runcam Nano 3 FPV Camera
Model: RunCam Nano 3
Image Sensor: 1/3′ CMOS
Horizontal Resolution: 800TVL
Lens : 2.3mm(M6.5) FOV 140‵
Signal System: NTSC
Camera Image: 4:3
S/N Ratio: >50dB
Electronic Shutter Speed: Auto
Auto Gain Control (AGC): Auto
Min. Illumination: 0.01Lux@1.2F
D-WDR: Auto
Power:DC 3-5.5V
Current: 110mA@5V 120mA@3.3V
Net Weight: 1.2g
Dimensions: L14mm*W14mm*H9mm
|
Lipo Battery ( Included)
Continuous Discharge Rate: 30C
Size: 57mmx12mmx7mm
Weight: 8g
Connector: PH2.0Quantity: 4 PCS
Mobula6 V2.0 Frsky Manual
Mobula6 V2.0 Flysky Manual
Pacakge Included:1x Mobula6 1S FPV Racing Drone4x 1S 300mAh 30C Lipo Battery1x 1S Lipo/LIHV USB Charger1x Propeller disassemble Tool
Package Included:
1 x Mobula6 1S FPV Racing Drone
4 x 1S 300mAh 30C Lipo Battery
1 x 1S Lipo/LIHV USB Charger
1 x Propeller Disassemble Tool
Recommended Category:
Toys & Games > Remote & App Controlled Vehicles & Parts > Remote & App Controlled Vehicles > Quadcopters & Multirotors > Racing Quadcopters
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.