23.5g Happymodel Mobula6 HDZero 65mm 1S SuperbeeF4 Lite Whoop FPV Racing Drone w/ HDZero Whoop Lite VTX HDZero Nano Lite Camera
Introduction:
Introducing Mobula6 HDZero, the very first 65mm HD brushless whoop in the World, weights less than 23.5 grams only!
We have been working on innovations of Brushless Whoop for Afew years. Just like many of you, we are particularly eager to have A65mm FPV whoop carrying HD VTX. Teaming with HDZero, Runcam, Nick Burns, Mr Shutterbug, Ryan Quellet and many other enthusiasts, here the dream comes true finally!
Specification:
Brand: Happymodel
Model: Mobula6 HDZero
Frame wheelbase: 65mm
Weight: 23.5 gram without battery
Size: 80mm*80mm*50mm
Receiver option:
SPI ELRS 2.4GHz
SPI FRSKY 2.4GHz
Compatible with 1S Lipo battery or Lihv battery PH2.0 Plug ( NOT Included)
| Flight controller SuperbeeF4 Lite ELRS/FRSKY |
SPI ELRS version Firmware target: CrazybeeF4SX1280 SPI FRSKY version Firmware target: CrazybeeF4FR MCU:STM32F411CEU6 (100MHz, 512K FLASH) Sensor: MPU-6000 or ICM20689 or BMI270(SPI connection) Power supply: 1S Lipo Lihv battery input (DC 2.8V~4.35V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Betaflight OSD(SPI Control) Built-in SPI Frsky/ExpressLRS receiver Built-in 5V 1 ABEC Built-in voltage detection |
| Onboard 4in1 ESC | MCU upgraded to EFM8BB21 Power supply: 1S LiPo/LiPo HV (2.8v~4.35v) Currents: 5A continuous peak 6A (5 seconds) Support BLHeliSuite programmable Factory firmware: O_H_5_REV16_8.HEX Default protocol: DSHOT150/DSHOT300/DSHOT600 |
| Onboard SPI ExpressLRS 2.4GHz RX ( ELRS 2.4G Version) |
Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz RF Frequency: 2.4GHz Antenna plug: IPEX Telemetry output Power: <1 2 dBm Receiver protocol: SPI ExpressLRS Could bind with ELRS V2.0 firmware TX module |
| Onboard Frsky SPI D8 /D16 2.4GHz RX ( Frsky Receiver Version) |
SPI BUS receiver Frsky D8/D16 compatible Compatible Non EU transmitter D8 model and EU-LBT(Frsky_x_lbt) Channels: 8ch or 16ch Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m Based on CC2500 RF module Compatible with Futab AS-FHSS , Redpine protocol |
| Motor | Mode: EX0802 19000KV Configu-ration:9N12P Stator Diamter:8mm Stator Length:2mm Shaft Diameter:??1mm Motor Dimension(Dia.*Len):??10.5mm*14.9mm Weight(g):1.7g No.of Cells(Lipo):1S only |
| Gemfan 1219 Bi-blades Propeller | Weight:0.19g Material: PC Pitch:1 inch Props Dia:30mm Center Hole Dia:1mm |
| HDZero Nano Lite Camer A | Dimension: 14x16x11mm Weight: 1.5gram 0.5 inch, up to 10650 mV/Lux-sec ultra-high sensitive CMos sensor Excellent low light performance Fov: 4:3: D:130?? H:108?? v:84?? 16:9:D:122?? H:108?? V:65?? |
| HDZero Whoop Lite VTX | 1S Input 25mW/200mW RF Output-SmartAudio Support 25.5×25.5 M2 Soft Mounting- Antenna Retention Removable Shielding Box- 32.5×32.5mm(29x29mm inner) 4.5grams/4mm Thickness (without shielding) |
Package Included:
1x Happymodel Mobula6 HDZero FPV Drone
1x Spare Canopy
1x Screw driver
1x Propeller disassemble tool 
Additional information
| Weight | 0.2 kg |
|---|---|
| Receiver: No selection | Compatible Frsky SPI D8/D16 Receiver, ELRS 24GHz |
Reviews
There are no reviews yet.